Single-loop bale ties are steel wires with a fixed loop at one end. The baling process itself is fully mechanical, but applying and closing the wire is done manually by the operator. This creates a strong and simple closure that remains secure during storage or transport.
Single-loop bale ties are the practical choice for bales with little or moderate rebound, such as cardboard, film or soft textiles. Because the wire is supplied cut to length and fitted with a fixed loop, the operator can close bales quickly and accurately. The galvanised finish makes the wire corrosion-resistant and clean to handle, making it suitable for both recycling environments and logistics applications.
At Metalwire we supply single-loop bale ties in various diameters and lengths, tailored to your baler and bundling process. Each rod is dimensionally accurate, tightly bundled and fitted with protected ends to ensure damage-free storage and transport.
Key options at a glance
Galvanised – corrosion-resistant
Lengths – approx. 2,500 mm to 6,000 mm
Packaging – tightly bundled, dimensionally stable and ready to use
Applications and advice: secure manual baling
Single-loop bale ties are mainly used in compact balers and for bales that are closed manually. These typically involve cardboard, film or textiles in smaller volumes, with limited rebound after baling. Thanks to the fixed loop, the bale can be closed simply and securely without extra tools.
Because the operator applies the wire by hand, it must be flexible and comfortable to handle. The right length and wire gauge ensure fast and accurate processing, keeping bales tightly secured without risk of loosening. The galvanised finish keeps the wire rust-free and clean, contributing to safe handling and long-term storage.
Typical applications
Manual tying of cardboard, film or soft plastics
Compact balers with limited rebound
Paper and plastic recycling in smaller volumes
Use in retail, logistics or textile processing
Bundling without damaging material surfaces
Why choose Metalwire
Tailored advice for single-loop bale ties
Not sure if single-loop bale ties are the right solution for your baling process? We help you make the right choice. Depending on your baler, material and bale volume, we advise whether single-loop bale ties are the best fit — or whether an alternative, such as double-loop bale ties or annealed wire, would be more suitable.
For single-loop bale ties specifically, we look at length, diameter and form, tailored to your workflow and bundling process. This way you can be confident the wire handles smoothly, closes securely and avoids delays.
Get in touch with us
Consistent quality and reliable performance
We produce single-loop bale ties in-house, with full control over every step: from wire selection to loop forming and final checks on length and diameter. This ensures wire that is dimensionally stable, easy to handle and reliably closes in vertical balers. Each batch is tested for tolerances and processability; technical specifications or datasheets are available on request.
In addition to single-loop bale ties we also supply other baling wires for different bundling processes. For bales with strong rebound, such as foam or tyres, double-loop bale ties are the better choice. For high volumes in automated installations, annealed wire is often applied. Together, these wires form a complete range, so you can always rely on a solution that matches your baler and material flow.
Discover what we can do for you.jpg)
.jpg)